Moff

Been a little while since the last update. We are working on a few exciting plans to take place in early 2014... Will be sharing with all once its all confirmed.. :)

We now have a nice new fuel break system fitted. Thanks to Abbey Motorsport for supplying the bits. Very simple way to drain fuel from the car. Full info here - http://www.theprojectmoff.co.uk/30-september-2013---fuel-break-kit-fitted.5517525.cms .

Updated Spec List Engine RB26 Red painted engine (from an R32 GTR) Garret 4094R Turbo (Oil and Water Cooled) HKS F Con Pro Gold Ecu (version 3.2) Wossner Pistons PEC Rods ACL Race Bearings Stage 1 Abbey Motorsport modified Head HKS Camshaft 264 Duration - 10.0mm Lift - Inlet HKS Camshafts 272 Duration -10.2mm Lift - Exhaust. Balanced Crank, flywheel, front pulley Top Mount Manifold Denso 720cc injectors HKS Oil pump N1 Water Pump HKS Gaskets and seals HKS Triple plate clutch Greddy External wastegate Trust 100mm FMIC Mocal 34 Row Oil Cooler 50mm Japspeed Radiator Nismo Fuel Pump Splitfire Coil Packs Rips modified GTR sump, with diff removed, welded, extended and baffled Cold start system removed Cabin heating systems removed from engine Greddy Fuel Rail R34 GTR Engine Loom Greddy EGT Gauge Greddy Profec B Boost controller HKS Hard Pipe Kit K&N Super Huge 100mm intake Filter Air Con Removed Carbon Canistor Removed RB25DET Gearbox Vibratechnics Custom Race Engine Mounts Exhaust Japspeed Silenced De-Cat V-Band 80mm Turbo Elbow & Downpipe Japspeed spec 1 cat back exhaust Drivetrain Heavy Shockproof Gear Oil Silkolene Diff Oil Nismo Pro S 1.5 Way Rear Diff with extended cooling fins HKS Triple plate Clutch Suspension Cusco Front Strut Brace Cusco Rear Strut Brace Driftworks Rear Camber and Caster Arms Cusco Front Camber Arms Polished Stainless Hicas Lock Bar Driftworks Front Tie Rods Tein Track Rod Ends Tein Track Rods Poly Subframe Bushes Driftworks Rear Traction Arms Ohlin Coilovers (Rebuilt to full track spec) Exterior Full Respray (coming soon) Nismo Bodykit Custom front Splitter Carbon Nismo 'B' Pillars Custom made Carbon Kevlar bonnet Custom Carbon Kevlar wider front wings Carbon Rear Boot Carbon Rear adjustable Spolier Custom Sand Blasted, etched and powder Coated front and rear subframes Dual HID's 600k 55w. Main and Dipped Beam Interior Tinted Windows Corbeau Evolution Carbon Kevlar Drivers Seat Sparco Formula D Suede Steering Wheel Snap off Steering boss kit Extended steering boss Apexi Dual Turbo timer Greddy Profec B2 Boost Controller Stripped Interior HKS Boost Guage 2 x 3" 4 Point EJS Racing Harnesses Andy Robinson FIA Approved 7 point Roll Cage with Door Bars Greddy 60mm EGT Gauge Greddy 60mm Oil temp Guage Greddy 60mm Oil pressure Guage Stack Water Temp Gauge Carbon Door Cards Brakes Nismo Steel Brake lines Stoptech 355mm Front and Rear Discs with Aluminium Hubs Stoptech 6 Pot Front Calipers Stoptech 4 Pot Rear Calipers DS3000 Pads Custom Moff made brake stopper RBF600 Racing Brake Fluid Wheels & Tyres 18 x 11J Rota MXR Rear ET+8 18 x 10J Rota MXR Front ET+12 Toyo 888's 265/30/18 Rear Toyo 888's 265/35/18 Fronts Power At 1.4 Bar Turbo Boost pressure Peak Power 605 BHP @ 7816 Revs @ Hubs Peak Torque 445 lb/ft @ 6310 Revs @ Hubs

Ooooooh, Time Attack put us on their website... :)

Hiya All, I've now done a write up of the time Attack Event, where we came 3rd. Pretty ggod for our first time out competitively in 3 years. there is an on board video, write up, and lots of photos on the blog http://www.theprojectmoff.co.uk/9th-june-2013---time-attack-race-day---snetterton-200.5496200.cms Feel free to subscribe to thread

Great Pic from Rich Sams

Full Write up of the event, along with photos and videos coming very soon.. If you would like to follow the Facebook page for Project Moff, please do :) www.facebook.com/themoffshop

Well, what a day... We managed to end up in 3rd position in the final, and were also faster than the previous club record set in 2011... (guy in first place now holds it, as he was first, but just goes to show how quick the final was) Photos and more details to follow soon... :)

Test day completed, it rained a lot !!! It was very Slippy, plenty of opposite lock.. Will dig the videos out soon. Some Photos Full write up andmore photos on the blog :) http://www.theprojectmoff.co.uk/24-may-2013---testing-at-snetterton.5490310.cms

Ok, we have been a bit busy ! Car is now back from http://www.abbeymotorsport.co.uk/ Lots has been done, read the full update on the blog, linky below... :) http://www.theprojectmoff.co.uk/22-may-2013---final-prep-before-test-day.5489077.cms Time to load up and get to Snetterton next, where the drivers view will be like this (well, it will have a steering wheel)

Here are the dyno results... The previous time Mark @ Abbey Motorsport had the car on the Dyno, at 1.5 Bar, the car was producing 594 BHP ATH. We the changes and improvements we made, he managed to bring the boost in a little earlier, and at 1.4 Bar, we now have 605 BHP ATH, and what should be a more driveable car too... Here is the Dyno Graph For the other dyno sheets, and a comparison of the last ones, for you real geeks, please see : http://www.theprojectmoff.co.uk/14-may-2013---abbey-motorsport-dyno-results.5487807.cms

Wow, huge thank sto the guys at Abbey Motorsport... Project Moff managed 605 BHP at the hubs, which is more power than before, and at less boooooost... Great results, dyno charts to follow... RWD only, this is going to be fun... !!!!

Project Moff is now at www.abbeymotorsport.co.uk. After a quick look over the car, they noticed the exhaust manifold is cracked and urgently need of repair. Its going to be removed and hopefully welded up. They are extremely busy, but have managed to find the time for this additional work, great stuff... :) More updates soon....

Here are some photos of the new rear arches. Believe it or not, we actually sprayed the rear arches using nothing more than black spray cans... This is only temporary until the car goes in for a respray. The wheels on the car are spare wheels until the race wheels are fitted.. The Car is now off to Abbey Motorsport in Surrey, who will be putting the car on their Dynapack Dyno, setting up the Suspension and some other Race prep.. More details on the blog.. http://www.theprojectmoff.co.uk/25-april---arches-done-off-to-abbey-motorsport.5484935.cms

some good Progress New rear arches are on .. The Wheels on the back, don't forget are 11J Wide !!! Next the caris of To Abbey Motorsport to go on their Dyna Pack Dyno, some suspension work, and Race Prep More info on the blog... http://www.theprojectmoff.co.uk/12-april-2013.5484423.cms Things are now really starting to hot up...

Now that we had cut the arches out to allow for more room, we had to weld the 2 skins back together. This would do a number of things : Put strength back into the arches Stop water getting back up into the arches and rusting Give us a mounting point for the new arches We started by tacking pices of metal in place. More info on the blog... http://www.theprojectmoff.co.uk/26-march-2013.5484293.cms'>Project Moff Blog https://www.facebook.com/themoffshop'>Project Moff on Facebook Loads more to come...

After we were happy with the mock up of the new rear wider arches, its was time to make a start with fitting... Out came the Angle grinder This is the car lowered back to the floor, as you can see we have plenty of room. This is an 11J rear wheel The next step will be to make up a lip for the new rear arch to sit on, as well as to join the 2 skins back together... Full details can be read on the site of course... http://www.theprojectmoff.co.uk/19-march-2013.5483995.cms Lots more to come...

Updated spec list .. :) Engine •RB26 Red painted engine (from an R32 GTR) •Garret 4094R Turbo (Oil and Water Cooled) •HKS F Con Pro Gold Ecu (version 3.2) •Wossner Pistons •PEC Rods •ACL Race Bearings •Stage 1 Abbey Motorsport modified Head •HKS Camshaft 264 Duration - 10.0mm Lift - Inlet •HKS Camshafts 272 Duration -10.2mm Lift - Exhaust. •Balanced Crank, flywheel, front pulley •Top Mount Manifold •Denso 720cc injectors •HKS Oil pump •N1 Water Pump •HKS Gaskets and seals •HKS Triple plate clutch •Greddy External wastegate •Trust 100mm FMIC •Mocal 34 Row Oil Cooler •50mm Japspeed Radiator •Nismo Fuel Pump •Splitfire Coil Packs •Rips modified GTR sump, with diff removed, welded, extended and baffled •Cold start system removed •Cabin heating systems removed from engine •Tomei Fuel Rail •R34 GTR Engine Loom •Greddy EGT Gauge •Greddy Profec B Boost controller •HKS Hard Pipe Kit •HKS Induction Kit •Air Con Removed •Carbon Canistor Removed •RB25DET Gearbox •Front & Rear Strut brace Exhaust •Japspeed De-Cat •Japspeed Turbo Elbow •V-Band 80mm Downpipe •Japspeed spec 1 cat back exhaust Drivetrain •Heavy Shockproof Gear Oil •Silkolene Diff Oil •Nismo Pro S 1.5 Way Rear Diff with extended cooling fins •HKS Triple plate Clutch Suspension •Front & Rear Strut brace •Driftworks Rear Camber and Caster Arms •Cusco Front Camber Arms •Polished Stainless Hicas Lock Bar •Driftworks Front Tie Rods •Tein Track Rod Ends •Tein Track Rods •Poly Subframe Bushes •Driftworks Rear Traction Arms •Ohlin Coilovers (Rebuilt to full track spec) Exterior •Full Respray (coming soon) •Nismo Bodykit •Custom front Splitter •Carbon Nismo 'B' Pillars •Custom made Carbon Kevlar bonnet •Custom Carbon Kevlar wider front wings •Carbon Rear Boot •Carbon Rear adjustable Spolier •Custom Sand Blasted, etched and powder Coated front and rear subframes •Dual HID's 600k 55w. Main and Dipped Beam Interior •Tinted Windows •Corbeau Evolution Carbon Kevlar Drivers Seat •Aftermarket Racing Steering Wheel •Apexi Dual Turbo timer •Greddy Profec B2 Boost Controller •Stripped Interior •HKS Boost Guage •2 x 3" 4 Point EJS Racing Harnesses •Andy Robinson FIA Approved 7 point Roll Cage with Door Bars •Greddy 60mm EGT Gauge •Greddy 60mm Oil temp Guage •Greddy 60mm Oil pressure Guage •Stack Water Temp Gauge •Carbon Door Cards Brakes •Nismo Steel Brake lines •Stoptech 355mm Front and Rear Discs with Aluminium Hubs •Stoptech 6 Pot Front Calipers •Stoptech 4 Pot Rear Calipers •DS3000 Pads •Custom Moff made brake stopper •RBF600 Racing Brake Fluid Wheels & Tyres •18 x 11J Rota MXR Rear •18 x 10J Rota MXR Front •Toyo 888's 315/30/18 Rear •Toyo 888's 265/35/18 Fronts

. . FULL BLOG CAN BE FOUND HERE - The Project Moff Race Car . . . . Hiya All, I'm new, thought I would start a thread.. :) Here is a bit about the car.. Its an R33 GTS-t Spec 2... I transplanted an RB26 R32 GTR Engine in, added a Garret 4094R Turbo. the car has a huge spec list, with plenty of updates to come... Lots more to come, but for now, here is a piccy... http://www.theprojectmoff.co.uk/images_temp/809/5246888/41018.9050810185/800/0/FFFFFF/0/brands-hatch-170412.jpg

I'm new here, live in Berks, love Nissans, have had a few, and currently a Skyline as a race car I have had for years... (will start a thread)