Igundwane Posted February 11 Posted February 11 The ECU unit from an Auto K13 2016 / 2019 - I have read that it will work in a manual K13 2012 / 2014 ( ok you have to change the ECU Wiring loom to allow for the ABS unit which appears to be the only main difference.) The fuse box is the same and as you are not changing the engine wiring harness to the injectors etc that should be fine The interior wiring loom i know will have to be changed to a newer one, again, it should not matter if the harness is from an auto or manual, so long as you have the correct BCM and Push Start (if required) Has anyone done this successfully ? or tried and failed and gone back to just swapping out the ECU unit for a newer manual one ? - Really interested in hearing your thoughts.
Recommended Posts